Chengli Special Automobile Co., Ltd.
Tel: +86 722 7113456 | Mail: Pinterest Twitter Linkedin Youtube Isuzu
  • FAW Jiefang 8 tons foam fire truck

    1.Outside dimensions :8360×2530×3600(mm)

    2.wheelbase:4600mm type: 4×2

    4.maximum speed:90km/h

    5.Emission Standards: china VI


    • Specifications







    Jiefang 8-ton foam fire truck, vehicle model: JDF5192GXFPM80/C6 foam fire truck, the truck is refitted from FAW Jiefang CA5200TXFP66K1L2E6 fire truck chassis. The whole vehicle is composed of two parts: the fireman’s cabin and the body. The cabin is changed from a single row to a double row, which can take 2+4 people. The vehicle has an exposed tank structure. The department is the pump room. The liquid carrier tank is made of high-quality carbon steel, and the interior is sprayed with epoxy primer and epoxy asphalt paint. It is elastically connected to the chassis. It carries 5.8 cubic meters of water and 2.157 cubic meters of foam. It is equipped with CB10/60 low-pressure fire pump with a rated flow of 60L. /S, PL8/48 vehicle fire monitor is installed on the roof. The biggest feature of the car is the large liquid carrying capacity, good handling and easy maintenance. It can be widely used in public security fire brigade, factories and mines, communities, docks and other places to fight large oil fires and general material fires.
    The fire performance of the whole vehicle meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the sixth stage limit of GB17691-2018 country VI; the whole vehicle has passed the test of the National Fire Equipment Quality Supervision and Inspection Center, and has been Included in the Ministry of Industry and Information Technology’s announcement of new automotive products.

    Main parameters of FAW Jiefang 8 tons foam fire truck

    Outside dimensions 8360×2530×3600(mm)
    maximum total mass 19450kg
    liquid carrier Water carrying 5.8 cubic meters, foam 2.157 cubic meters
    top speed 90km/h
    Fire pump rated flow 60L/s 1.0MPa
    Fire monitor rated flow 48L/s 1.0MPa
    Fire cannon range Foam≥65m Water≥70m
    specific power 239/19.45=12.3
    Approach / departure angle 18°/11°

    Main parameters of FAW Jiefang 8 tons foam fire truck

    model CA5200TXFP66K1L2E6
    manufacturer China FAW Group Co., Ltd.
    Engine rated power 239kw
    engine capacity 7146ml
    Engine Emission Standards GB17691-2018 National VI
    drive form 4×2
    wheelbase 4600mm
    Maximum allowable gross weight 20100kg
    Minimum turning radius ≤9m
    gearbox manual
    power takeoff Sandwich PTO

    fire pump of FAW Jiefang 8 tons foam fire truck

    model CB10/60 type low pressure vehicle fire pump
    form Medium and low pressure centrifugal
    Limited Data 60L/s @1.0MPa
    outlet pressure rating 1.0MPa
    maximum suction depth 7m
    water diversion device Self-contained vane pump
    Diversion time Maximum suction depth≤50s

    Water-foam dual-purpose fire monitor

    model PL8/48
    manufacturer Chengdu West Fire Machinery Co., Ltd.
    Rotation angle 360° horizontal rotation
    Maximum pitch/depression angle Depression angle≤-15°, elevation angle≥+45°
    flow 48L/S
    range Foam≥60m Water≥65m

    Equipment box and pump room

    structure The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate.
    equipment box The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. There are storage boxes in the equipment box room according to the needs. Tool box and roller shutter on side lower skirt for small tools
    pump room The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room
    Insulation location: install fuel heater (optional according to customer requirements)
    Ladder and car handle The rear climbing ladder is made of aluminum alloy two-section flip ladder. When used, the height should not exceed 350mm from the ground. The handle on the car adopts a grooved anti-skid round steel pipe on the surface, and the surface is sprayed with plastic.

    On-board equipment

    1 straw 150×4 meters 2 root threaded
    2 water filter FLF150 1 piece threaded
    3 Trap FII80/65×3-1.6 1 piece Cassette
    4 water collector JII150/65×2-1.0 1 piece Cassette
    5 hose 20-65-20 6 plate medium pressure; cassette
    6 hose 13-80-20 6 plate low pressure; cassette
    7 Reducer KJ65/90 2 piece Cassette
    8 Hose wrap DT-SB 4 piece
    9 Hose hook 4 piece
    10 Ground hydrant wrench QT-DS1; length 400 1 piece
    11 underground fire hydrant wrench Long 860 1 piece
    12 Suction wrench FS100 2 piece
    13 DC switch water gun QZ6G3.5/7.5; 65 1 branch low pressure; cassette
    14 DC Blossom Water Gun QZ6K3.5/7.5; 65 1 branch low pressure; cassette
    15 foam gun PQ4/0.7Z6 1 branch
    16 foam pipette 40*2700 1 piece
    17 fire bucket 1 indivual
    18 fire extinguisher 3㎏ 1 Tool
    19 fire waist axe Length 390; GF-285 1 piece
    20 rubber hammer 1 piece
    twenty one Rechargeable Portable Lights 1 piece
    Fire Truck , , , , , ,

    Enquiry Form ( we will get back you as soon as possible )


    5 + 5 = ?

    Maybe you like also

    Open chat
    Whatsapp Talk Now!