Dongfeng KR/ Tianjin 6 ton foam fire truck

March 14, 202206:34:35Comments166

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng KR/ Tianjin 6 ton foam fire truck

Dongfeng Tianjin 6-ton foam fire truck is made of Dongfeng Tianjin series chassis modified from DFL1160BX1V. The whole vehicle is composed of two parts: the fireman's cabin and the body. The cabin is a modified double row, which can take 2+4 people. The vehicle has a built-in tank structure. The front of the body is a water tank + equipment box, and the rear is a pump. House. The liquid carrier tank is made of high-quality carbon steel, and the interior is sprayed with epoxy primer and epoxy asphalt paint. It is elastically connected to the chassis. It carries 4050kg of water and 1720kg of foam liquid. It is equipped with CB20.10/ 20.40-XZ medium and low pressure fire pump, rated flow 40L/S, PH32 manual foam proportioning mixer, PL32 vehicle fire monitor produced by Chengdu West Fire Machinery Co., Ltd. is installed on the roof. The biggest feature of the car is maneuverability, good handling and easy maintenance. It can be widely used in public security fire brigade, factories and mines, communities, docks and other places to fight large oil fires and general material fires.
The fire performance of the whole vehicle meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the fifth stage limit of GB17691-2005 (National V standard); the whole vehicle has passed the inspection of the National Fire Equipment Quality Supervision and Inspection Center (Report No.: Zb201630559) and has been included in the Ministry of Industry and Information Technology's announcement of new automotive products, and CCCF is in the process of applying.
Vehicle name:Dongfeng Tianjin foam fire truckVehicle model:JDF5154GXFPM60 foam fire truckDimensions (mm):8205×2485×3375
Chassis model:DFL1160BX1Vengine:Cummins 180hp/140kw
(ISB19050)
Tank volume:6 cubic meters (water tank 4 cubic meters, foam tank 2 cubic meters)
Drive type:4×2Emission Standards:Country V/Country VThe number of occupants in the cab:2+4 people
Number of axes:2Front track:1880,1900,1920mmTire specifications:9.00R20, 10.00R20
Wheelbase:4700mmRear Track:1800,1860,1820mmNumber of leaf springs:9/12+10,8/10+7
7/9+6,8/10+8
Axle load:5800/10000kgMaximum speed:95km/hAnti-lock braking system:have
front suspension/rear suspension1430/2075mmNumber of tires:6Approaching departure angle:14/12°
Total mass:15200kgRated quality:5770kgCurb weight:8980kg
other:Braking system: service brake system, dual-circuit air brake: parking brake, spring energy storage air brake: auxiliary brake, engine exhaust brake.
Overall layout: The whole vehicle is composed of two parts: the fireman's cabin and the body. The body layout adopts an integral frame structure, with a water tank inside, equipment boxes on both sides, and a water pump room at the rear. The tank body is a parallel cuboid box tank. .
power takeoffstructure and formIntegral box type, full power, sandwich type, forced adjustable circulating water cooling, splash oil lubrication
cabStructure typeThe overall four-door double-row flat head, additional crew room, can take a total of 6 people, the driver's position is on the left
Equipped with firefighting facilitiesThe dashboard of the original car is equipped with a fire control panel and a warning light control box, and 1. an alarm; 2. a power take-off control switch and indicator light; 3. an additional power switch;
equipment boxstructure and formThe main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate. (Aluminum alloy square tube can be welded according to user needs)
equipment boxThe equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. There are storage boxes in the equipment box room according to the needs.
containermaterialHigh-quality carbon steel with a thickness of 4mm (stainless steel and PP material can be used according to user needs)
jugManhole: 1 DN460 manhole with quick locking/opening device Connect 1 DN65 port on the left and right sides to the water inlet and outlet: set a water tank to the water pump inlet pipe, DN100 valve, which can be controlled by pneumatic and manual, set a water pump to the water tank filling pipe, DN50 valve, can be controlled by pneumatic and manual
foam tankManhole: 1 DN460 manhole with quick locking/opening and automatic pressure relief device : Set 1 DN40 foam tank to pump out foam pipe
volumeWater tank: 4000kg Foam tank: 1750kg
pump roomstructure and formThe pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room
Equipped with firefighting facilitiesWater filters, water collectors, water separators, water guns, reducing joints, suction pipe wrenches, etc., can also be added according to special needs: such as hand-lifted motor pumps, fuel heaters, etc.
ladderLadder and car handleThe rear ladder is made of aluminum alloy two-section flip ladder, and the height of the ladder is not more than 350mm when in use.
Fire PumpmodelCB20.10/20.40 type medium and low pressure fire pump for vehicles
Structure and PerformancestructureAtmospheric pressure centrifugal
performancelow pressure40L/s @1.0MPaWater diversion time ≤35 The maximum suction depth is 7m
medium pressure20L/s @2.0MPa
water diversion deviceSelf-contained vane pump
fire monitormodelPL32rangeFoam≥45m Water≥50m
flow32L/S
Maximum pitch/depression angle: Depression angle≤-15°, Elevation angle≥+45°
Rotation angleWater and foam dual-purpose fire monitor, 360° horizontal rotation
piping systemPipe materialHigh quality seamless steel pipe
suction lineThere is a DN125 suction port on the back of the pump room
water injection lineThere is a DN65 water injection port on the left and right sides of the water tank, and a DN40 water pump is installed in the pump room to inject water into the tank
outlet pipeThere are one DN65 and one DN80 water outlet on the left and right sides of the pump room, with stop valve and cover
Cooling water pipelineCooling water line and control valve with cooling power take-off
Electrical systemAdditional electricalindependent circuit
Auxiliary lightingThe fireman's room, the water pump room and the equipment box are respectively equipped with lighting lamps, and the control panel is equipped with lighting and indicator lights, etc.
Strobe lightRed and blue strobe lights are installed on both sides of the body
warning deviceA long row of full red warning lights is installed on the top of the cab. Siren with control box below driver front
fire lighting1 35W fire searchlight installed at the rear of the upper body
control systemIn-cab controlsWater pump disengagement, warning light alarm, lighting and signal device control, etc.
Pump room controlBodywork main power switch, parameter display, status display
Optional partWith sprinkler function: front flush, rear sprinkler; roof tail lights; standard CB10/40 normal pressure pump, optional CB20.10/20.40 medium and low pressure pump, etc.
serial numbernameSpecificationquantityunitRemark
1straw125×4 meters2rootthreaded
2water filterFLF1251piecethreaded
3TrapFII80/65×3-1.61pieceInternal button
4water collectorJII125/65×2-1.01pieceInternal button
5hose13-65-206platelow pressure; internal button
6hose13-80-206platelow pressure; internal button
7ReducerKJ65/802pieceInternal button
8Hose wrapDT-SB4piece
9Hose hook4piece
10Ground hydrant wrenchQT-DS1; length 4001piece
11underground fire hydrant wrenchLong 8601piece
12Suction wrenchFS1002piece
13DC switch water gunQZG3.5/7.5; 651branchlow pressure; internal button
14DC Blossom Water GunQZK3.5/7.5; 651branchlow pressure; internal button
15foam gunPQ4/0.7Z1branch
16foam pipette40*27001piece
17fire bucket1indivual
18fire extinguisher3㎏1Tool
19fire waist axeLength 390; GF-2851piece
20rubber hammer1piece
twenty oneRechargeable Portable Lights1piece
Dongfeng KR/ Tianjin 6 ton foam fire truck
serial numbernameSpecificationquantityunitRemark
1automatic charging device24V1set
2backrest3set
3air respiratornumber of membersset
4water hose bridgerubber2vice
5Telescopic Ladder1vice
6Hand pump1tower
7Demolition tool1set
8Other fire fighting equipment

Dongfeng KR/ Tianjin 6 ton foam fire truck

Welcome to Chengli Special Automobile Co.,Ltd, any questions contact us via: sales@chengli.co
匿名

Comment

Anonymous Write