Euro Sixth Dongfeng D9 Aluminum Alloy 4×2 Largest Fuel Carrier

Dongfeng Dolica d9 series, 2315 row semi-cab, wheelbase 4700mm, Cummins 220 horsepower Euro six engine isb180 50 (environmental protection, 12 batches of fuel), Shacman tooth eight-speed gearbox, front axle 4.5t, rear axle 10t, 1000r20 steel wire Tire, air conditioner, electric glass, central control door lock, ABS.

The standard configuration is a single warehouse with pump, which can be pumped in and out, emergency shut-off device (subsea valve), European standard tank port, with power take-off, two equal-long oil pipelines, two small locks, two fire extinguishers, and two plugs Cover, a breathing valve, a fire cap, reinforced bumpers on both sides and rear, non-slip climbing ladder. Customers can choose to install a computerized fuel dispenser, an automatic return reel, a fuel gun, a flow meter, and a full set of bottom-loading oil (oil unloading valve, vapor recovery, anti-overflow probe). Refueling truck manufacturing process: The tank tank of the fueling truck is formed at one time with advanced rotational molding technology, no welds, high strength, no leakage, corrosion resistance and long service life. The clapboard is supported by two inclined plane structures to ensure transportation and transportation. The accessories are all fixed with corrosion-resistant bolts and sealed with rubber gaskets. The tank body is made of high-quality steel from Wuhan Iron and Steel in accordance with inter Euro standards. The tank body adopts advanced butt welding technology. After the tank body is formed, the high-pressure gas leak test, so that the tank body has the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation. Afterwards, the shot blasting pretreatment process is adopted to realize the rust removal and anti-painting. The advanced baking paint technology is adopted, and the appearance is beautiful and durable.

State six D9 aluminum tanker parameters 16.5 cbm 4×2 tanker Chu wins the new 14 t fuel truck pictures Chu Valvoline CSC5189GYYLS6 aluminum alloy tanker Euro total mass of 16.5 cbm aluminum D9 six Dongfeng tanker announcement volume 18 Tons, the rated load mass is 11.1 tons, the curb weight is 6.75 tons, and the full load is 14 tons. Chassis configuration: Dongfeng D9 Dolica aluminum alloy fuel tank truck configuration: Dongfeng Dolica d9 series, 2315 row half-cab, wheelbase 4700mm, Cummins 220 horsepower Euro six engine isb180 50 (environmental protection, 12 batches of fuel), Shacman eight gears Gearbox, front axle 4.5t, rear axle 10t, 1000r20 steel wire tires, air conditioner, electric glass, central control door lock, ABS. Bodywork configuration: single warehouse with pump, which can be pumped in and out, emergency cut-off device (subsea Valve), European standard tank mouth, with power take-off, two equal-long oil pipelines, two small locks, two fire extinguishers, two blocking caps, one breathing valve, one fire cap, two side and rear reinforced bumpers, Non-slip ladder. Customers can choose to install a computerized fuel dispenser, an automatic return reel, a fuel gun, a flow meter, and a full set of bottom-loading oil (oil unloading valve, vapor recovery, anti-overflow probe).

Refueling truck manufacturing process: The tank tank of the fueling truck is formed at one time with advanced rotational molding technology, no welds, high strength, no leakage, corrosion resistance and long service life. The clapboard is supported by two inclined plane structures to ensure transportation and transportation. The accessories are all fixed with corrosion-resistant bolts and sealed with rubber gaskets. The tank body is made of high-quality steel from Wuhan Iron and Steel in accordance with inter Euro standards. The tank body adopts advanced butt welding technology. After the tank body is formed, the high-pressure gas leak test, so that the tank body has the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation. Afterwards, the shot blasting pretreatment process is used to achieve rust removal and rust prevention. The paint adopts advanced baking paint technology, which is beautiful and durable.

1. The vehicle is suitable for the transportation of dangerous goods. The type of the vehicle for transporting dangerous goods is: FL, and the category number: 3. Effective tank volume: 16.5 cubic meters, transportation medium: gasoline, density: 700 kg/cubic meter, tank dimensions (length×width×height) (mm): 5700×2300×1600.

2. The side/rear protection materials are all aluminum alloy and bolted connection. The rear protective cross-section size is 120×60mm, and the lower edge is 500mm above the ground. The upper part of the tank is optionally equipped with an aisle.

3. Only the wheelbase is used: 4700mm. Only use the chassis with front exhaust pipe, speed limit device (speed limit 79km/h), front wheel disc brake and radial tires. Install a driving recorder with satellite positioning function. The manufacturers and models of the EBS system are: WABCO Automotive Control Systems (China) Co., Ltd. (model: EBS3), and Guangzhou Ruilicome Automotive Electronics Co., Ltd. (model: CM-EBS). The engine/fuel consumption value (L/100km) corresponds to: WP4.6NQ220E61/26.53, WP6H245E61/26.66, WP6H270E61/26.66. The rear axle adopts air suspension. The steering wheel is equipped with a tire burst emergency protection device.