Chengli Special Automobile Co., Ltd
Tel: +86 18872992009 | sales@cl-spv.com
EnglishالعربيةFrançaisРусский

Liuqi small three-axle 20.2-24 cbm aluminum alloy oil truck

Introduction
Chassis description

H5 heavy truck body, Yuchai 240 horsepower engine, 8JS105TA 8-speed gearbox, cab H51S, rear axle/speed ratio: 153/4.875/widening brake, 295/80R22.5 tubeless tires, manual hydraulic flip, electric glass, middle Control lock, air conditioning, automatic adjustment arm, front exhaust pipe, front speed limit, ABS. Effective tank volume: 20.7 cubic meters, actual volume 24.2 cubic meters.

Modification instructions

Liuqi small three-axle 20.2 cbm oil tanker top-mounted configuration: 20.2 cubic meters of tank body, tank thickness greater than or equal to 6mm, divided into warehouses, front warehouse 10 tons and other rear warehouses, full set of European standard: two European standard tank mouths , Two submarine valves, oil and gas recovery, two lower oil ports, anti-overflow probes. Enclosure sealing, folding guardrail, steel wire mesh walkway, Shandong special oil pump (80-60), two long oil pipelines such as tanks, two fire extinguishers, and one fire cap. Other standard paints: silver gray, reflective strips, reflective tapes, safety notices, and “flammable” labels. Medium: diesel, gasoline, kerosene. The vehicle has a fuel announcement, and we provide the Euro V chassis certificate, vehicle qualification certificate, tank inspection report, flaw detection report, and subsea valve certification required for the vehicle to be registered.

Detailed description

One,DongfengLiuqi small three-axisOil truckVehicle appearance:
Tanker truckAll of them are modified with domestic mature original chassis, and users can also bring their own chassis to the factory for modification.
The tank body is made of high-quality steel produced by Wuhan Iron and Steel and made in accordance with inter Euro standards.
Tanker truckThe measurement can be performed with single-count, double-count return-to-zero flow meters, or a vehicle-mounted tax-controlled computer refueling machine.
2. Dongfeng Liuzhou Automobile’s small three-axle oil tanker chassis configuration:
Dongfeng Liuzhou Automobile’s small three-axle chassis, Yuchai 240 horsepower, aluminum alloy tank body. Vehicle model: CSC5250GYYLE Chassis model: Liuqi LZ1250M5CBT, Yuchai YC6JA240-50, 240 horsepower Euro V engine, 8JS105TA 8-speed gearbox, cab H51S, rear axle/speed ratio: 153/4.875/widening brake, 295 /80R22.5 Tubeless tire, mechanical full-floating cab suspension, manual hydraulic flip, mechanical damping driver seat, electric window regulator, remote control central lock, air conditioner, vehicle terminal (driving recorder + compatible with Beidou GPS), External sunshade, multi-state switch, domestic valve, ABS (WABCO), automatic adjustment arm, electromagnetic clutch fan, main power switch, exhaust auxiliary brake, front exhaust pipe, exhaust spark extinguisher, front disc brake , ECU speed limit device (speed limit 80km/h), the main switch in the cab, the same color bumper + fender and other unspecified matters shall be produced and implemented according to the standard configuration of the chassis manufacturer.
3. Dongfeng Liuzhou Motor’s small three-axle oil tanker top-mounted configuration:
The actual volume of the upper installation: 26 cbm aluminum alloy tank, tank body plate, wave breaker is 5mm, head is 6mm, aluminum alloy 5182, double bins are equally divided, 2 European standard manholes, rear ladder can be removed, 300L water tank and dripping water The device (installation of electronically controlled dripping water) is equipped with bottom oil-loading device (including emergency shut-off valve device, domestically produced), and oil and gas recovery device (domesticized). Special inspection institute inspection report and manufacturer tank inspection report are issued; each warehouse is equipped with a volume table. Equipped with static conductive drag zone, grounding wire reel, three copper pieces on each side of the tank, totaling six, the copper piece is more than 1.5 meters away from the oil discharge port; 2 8kg fire extinguishers; integral mudguard; equipped with a spare tire rack , No spare tire; one cylindrical aluminum alloy hose box on each side; aluminum telescopic manual guardrail (with handle); the bottom loading oil system is installed on the right side (side the passenger cabin); the aluminum alloy tank is silver-white, pasted Reflective signs, 3 “flammable liquids” signs, 3 safety signs, identification plates on the left and right sides of the tank and the tail; fireworks are strictly prohibited, and three explosive characters are given with the car; the transportation medium is marked on the tank: gasoline; Equipped with a T- cbm with a 120cm scale, and a diagonally inserted T- cbm sleeve is installed on the top of the tank; an aluminum net walking platform is installed on the top of the tank. Other unspecified matters shall be implemented in accordance with the manufacturer’s aluminum alloy oil truck production standards.
4. Process description of Dongfeng Liuzhou Motor’s small three-axle oil tanker:
1. Special tank body, exquisite craftsmanship, one-time molding.
The tank body is made of modified polyethylene as raw material, and it is formed at one time by advanced rotational molding process. It has no welds, high strength, no leakage, corrosion resistance and long life.
2. The material of the tank body is multi-selected, and the quality is guaranteed.
Because of the particularity of the transported material, the material of the tank body of the chemical truck needs to be determined according to the characteristics of the transported product. Stainless steel, rubber lining, rotomolding, glass fiber reinforced plastic, plastic tank (polyethylene, polypropylene), aluminum can, carbon steel, etc. can be selected Material.
3. Tank shape, special medium, and tank shape are optional.
The shape of the tank can be made into an oval,FangyuanShape, circle, etc. The tank body of the oil tanker is round, the surface area is small, the material is low, the volumetric efficiency is high, the oval shape, the center of mass is low, and the stability is good. Waist drum shape, low center of mass, good stability.
4. The tank body is divided into silos, with various media and independent silos.
The whole tank body can be divided into single warehouse or multiple warehouses. The warehouse can be divided into compartments. The lower end of the middle partition has a through hole. Each warehouse is welded in the middle of the divided warehouse or multiple warehouses. The warehouse can be divided into rooms. The lower end of the middle partition has a through hole. Chemicals, liquid foods.
5. The tank body is painted with good finish and strong adhesion.
The tank body and metal accessories of this type of car have been shot blasted and phosphated before being painted. The sprayed polymer contains Zi primer and high-quality topcoat. It has strong adhesion, good corrosion resistance, uniform paint film, and bright and long-lasting color.
6. Chemical pump with stable performance and good sealing.
The high-quality chemical liquid special pump from a well-known domestic company is selected, which has the advantages of stable and reliable performance, good sealing performance, beautiful appearance, and convenient use and maintenance.
7. Anti-wave baffle, alleviate impulse and isolate hidden dangers.
There are multiple all-plastic anti-wave partitions inside to prevent the liquid in the tank from impacting the seal head and causing danger during emergency braking or rapid start.
8. Emergency cut-off device, one-key start, high safety.
It can effectively absorb the energy transmitted by the vehicle damaged by the impact of the pipeline, and the valve body is broken from the fracture groove to separate the tank from the pipeline, thereby ensuring the integrity of the sealing mechanism, avoiding material leakage, and greatly improving the safety of transportation.
9. The head of the tank body can be formed at one time with stable performance.
The one-time forming water pressure head makes the tank more resistant to impact. Using automatic welding technology, the tank has no leakage and the performance is more stable.
5. Process characteristics of Dongfeng Liuzhou Motor’s small three-axle oil tanker:
1. It is formed at one time with advanced rotomolding technology, with small weld seam, high strength, no leakage, corrosion resistance and long service life.
2. The tank body is made of WISCO carbon steel 6mm high-quality steel according to inter Euro standards.
3. The tank body adopts advanced butt welding technology, and after the tank body is formed, high-pressure gas leak test is used to make the tank body have the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation.

HD pictures
柳汽小三轴20.2-24方铝合金运油车图片
柳汽小三轴20.2-24方铝合金运油车图片
柳汽小三轴20.2-24方铝合金运油车图片
柳汽小三轴20.2-24方铝合金运油车图片
illustrate in detail
Liuqi small three-axle 20.2 cbm oil tanker chassis configuration: Liuqi LZ1250M5CBT, Yuchai YC6JA240-50, 240 horsepower Euro fifth engine, 8JS105TA 8-speed gearbox, cab H51S, rear axle/speed ratio: 153/4.875/plus Wide brake, 295/80R22.5 tubeless tire, mechanical full-floating cab suspension, manual hydraulic flip, mechanical damping driver seat, electric window regulator, remote control central lock, air conditioner, vehicle terminal (drive recorder + compatible Beidou GPS), external sunshade, multi-state switch, valve, ABS (WABCO), automatic adjustment arm, electromagnetic clutch fan, main power switch, exhaust auxiliary brake, front exhaust pipe, exhaust spark extinguisher, front Disc brakes, ECU speed limit device (speed limit 80km/h), cab indoor master switch, bumpers of the same color + fenders and other unspecified items are produced and implemented according to the standard configuration of the chassis manufacturer.
Keywords:
Dongfeng, Fuel Tank Truck , , , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
5 + 4 = ?

Maybe you like also