Faw of the Euro four flatbed one tow two wrecker truck

March 10, 202101:11:05Comments207
Introduction
Chassis description

J6L flat roof semi-cab, wheelbase 4400mm, Faw six-gear box, power steering, clutch assist, automatic exhaust, air-cut brake, 8.25-16 tires, Dachai 140 horsepower engine BF4M2012-14E4.

Modification instructions

The car has a length of 6.1 meters and a width of 2.3 meters. It is a 3P2A folding and stamping flat panel. The car is made of the Euro standard 5mm thick carbon steel checkered plate. The flat plate is composed of multiple pressed pre-pressing plates, and 12 reinforced channel steel beams are fixed, which not only reduces the weight of the whole car, but also increases the lifting and loading capacity. The maximum load-bearing mass is 4 tons, the minimum inclination angle of the flat plate is 8 degrees, the rated lifting mass of the lifting system is 1.8 tons, a 4 tons hydraulic winch, a thick steel wire rope 20 meters, a tool box, a hand washing box, the car Equipped with 6 straps, two trolleys (auxiliary wheels), a pair of fork holders, a pair of fork holders, a pair of L-shaped tire holders, a chain hook, and an optional LED long row of warning lights.

Detailed description

 

Chassis parameters
Chassis model: CA1083P62K1L2E4 Fuel type: Diesel oil
Number of axes: 2 Front track: 1800(mm)
Wheelbase: 4250, 4400 Rear wheelbase: 1740(mm)
Number of passengers in the cab: 3 Number of springs: 11/7+6, 3/7+6, 11/7+-, 3/7+-
Number of tires: 6 Axle load: 3000/5280
Tire specifications: 8.25-16,8.25R16(16PR)
Engine parameters
engine: Engine manufacturer: Displacement (ml): Power (kw):

BF4M2012-14E4

FAW Group Corporation China's first car

4040

106

The Faw of the Euro Siping board one with two wrecker technical parameters:
Maximum supporting weight (kg)
8495
Lifting system
Maximum lifting weight (kg)
2200
Maximum lifting capacity at full extension (kg)
1620
Rear support distance (mm)
2540
Effective length of support arm (mm)
1640
Support arm telescopic stroke (mm)
1340
Inclination angle of support arm ( 0 )
7
Lower inclination angle of support arm ( 0 )
-9.5
The maximum distance from the top surface of the fully retracted cross arm to the ground (mm)
550
platform
Inner length (mm)
5800
Inner width (mm)
2220
Minimum tilt angle of platform ( 0 )
Folding type is 8 0
Platform working stroke (mm)
2700
The height of the platform from the ground (mm)
1060
Maximum bearing capacity of plate mechanism (kg)
3000
twist
plate
Quantity (only)
1
Each rated traction force (kN)
40
Wire rope diameter (mm)
φ11
Wire rope length (m)
25
Diameter of winch (mm)
φ110
Minimum line speed of wire rope (m/min)
5
HD pictures
解放国四平板 one tow two wrecker 图片
解放国四平板 one tow two wrecker 图片
解放国四平板 one tow two wrecker 图片
解放国四平板 one tow two wrecker 图片
illustrate in detail
The car has a length of 6.1 meters and a width of 2.3 meters. It is a 3P2A folding and stamping flat panel. The car is made of the Euro standard 5mm thick carbon steel checkered plate. The flat plate is composed of multiple pressed pre-pressing plates, and 12 reinforced channel steel beams are fixed, which not only reduces the weight of the whole car, but also increases the lifting and loading capacity. The maximum load-bearing mass is 4 tons, the minimum inclination angle of the flat plate is 8 degrees, the rated lifting mass of the lifting system is 1.8 tons, a 4 tons hydraulic winch, a thick steel wire rope 20 meters, a tool box, a hand washing box, the car Equipped with 6 straps, two trolleys (auxiliary wheels), a pair of fork holders, a pair of fork holders, a pair of L-shaped tire holders, a chain hook, and an optional LED long row of warning lights. J6L flat roof semi-cab, wheelbase 4400mm, Faw six-gear box, power steering, clutch assist, automatic exhaust, air-cut brake, 8.25-16 tires, Dachai 140 horsepower engine BF4M2012-14E4.

Welcome to Chengli Special Automobile Co.,Ltd, any questions contact us via: sales@chengli.co
匿名

Comment

Anonymous Write