Chengli Special Automobile Co., Ltd
Tel: +86 18872992009 | sales@cl-spv.com
EnglishالعربيةFrançaisРусский

Fuel Tank Truck

» Transportation Truck » Fuel Tank Truck

JAC Junling 7-ton fuel truck

Introduction
Chassis description

JAC Junling E6 wide-body cab, 3815 wheelbase, Weichai 130 horsepower engine, 215/75R17.5 vacuum tires, 6.4 ton rear axle, air brake, 6-gear box, power steering, air conditioning, clutch booster, power take-off , Metallic paint, ABS, front disc, exhaust front, PTO, driving recorder

Modification instructions

The tank volume is made according to the size of the announcement. The announcement volume is 7 cubic meters (actually 8.3 cubic meters). There are fuel announcements and environmental protection announcements. The tank body is 5mm and the expansion head is 5mm thick. Fuel dispenser, 15-meter automatic reel with gun, including a complete set of European standard system (European standard tank port, submarine valve, bottom oil port, anti-overflow probe acne detection, exhaust gas recovery), equipped with 19 emergency regulations Shut-off valve G dynamic closing system, equipped with a fire cap, two fire extinguishers, after the production of the tank, it will be carbon-damaged, post reflective signs, paste the word “explosion”, safety notices, front exhaust pipes, with European standard lifting guardrails, The rest is standard in the factory. Issuance of registration procedures (chassis certificate, vehicle certificate, vehicle-mounted tools, warranty manual, service manual) in compliance with Euro laws and regulations.

Detailed description

PRODUCT DEscriptION / Product description

JAC Junling small tank truck , gasoline medium, the tank body size of the tank truck is 7 cubic meters (actually 8.3 cubic meters), according to customer requirements, we can choose different announcements, diesel medium according to Euro regulations, the tank body will be smaller, and Gasoline medium is larger than diesel medium according to Euro regulations. The tanker can be hung up and down. The emission standards meet the requirements of the Euro environmental protection department.


JAC Junling E6 wide-body cab, 3815 wheelbase, Weichai 130 horsepower engine, 215/75R17.5 vacuum tires, 6.4 ton rear axle, air brake, 6-gear box, power steering, air conditioning, clutch booster, power take-off , Metallic paint, ABS, front plate, exhaust front, PTO, driving recorder, the fuel of the car has been released, and it is operated by the Shanghai Office, and the annual review is worry-free.

 

Chu Sheng Hubei Automotive Co., Ltd. based in whole tanker tank made of high quality steel, bowser is guaranteed during operation of the internal pressure and atmospheric pressure based actuation present a breathing valve cover large tank installed, The bottom of the tank is equipped with a submarine valve, also known as an emergency shut-off valve, which is installed at the bottom of the tank, which can replace the traditional top-loading refueling for bottom-loading refueling, making the operation easier, time-saving, safe and environmentally friendly for the staff. A cut-off groove is designed on the valve body. In the event of an accident in the tanker, the cut-off groove is disconnected. Under the premise of not affecting the sealing of the tank body, the bottom pipeline and the tank body are cut off, effectively preventing the oil leakage in the tank and ensuring the oil The tank is safe. The tank truck produced by our company is suitable for transporting gasoline, kerosene, diesel, vegetable oil, edible oil, heavy oil, coal tar and non-petroleum products such as alcohol, aldehyde, benzene, ether and other liquid substances.

The 7-ton JAC Junling refueling truck has great flexibility and can be refueled according to demand. It is suitable for cars, loaders, excavators, cranes, etc. where there is no gas station, such as cities, suburbs, mines, docks, airports, stations, and rural roads. The refueling of mining equipment and ships greatly improves the convenience of refueling various vehicles and equipment. The flexibility is unparalleled. It serves the public widely and reduces the inconvenience of various vehicles or equipment that can only be refueled at gas stations. It is a veritable mobile gas station.


The effective volume of the tank body of the 7-ton JAC Junling tanker is 7 cubic meters (the actual volume is 8.3 cubic meters), the tank body is made of high-quality steel Q235 Euro standard carbon steel sheet, the world’s pressure volume cutting-edge manufacturing equipment, one-time rolling and forming manufacturing process, machinery The horizontal welding seam, the computer-controlled automatic forming head, the inside and the outside are fully welded and butt joint, completely seamless forming, the thickness of the tank body is 5mm, solid and durable, the whole tank body can be divided into single warehouse or multiple warehouses, and the warehouse can be divided into rooms. There is a through hole at the lower end of the middle partition, and each warehouse is welded with sub-warehouses or multiple warehouses. The warehouse can be divided into chambers. The lower end of the middle partition board has a through hole. Each warehouse is welded with a sub-warehouse strengthening wave baffle to reduce the tank when driving. The impact of the oil in the body and the improvement of the rigidity of the tank body adopts high-pressure gas leak testing and 100% X-ray inspection to make the tank body have the characteristics of high strength, stable center of gravity, safe and stable vehicle transportation. Issue a tank inspection report.
Display Technology head
(Head Technology Display):


封头

Humanized design(User friendly design):

Connect a one-inch aluminum alloy tube at the front end of the oil pipeline on both sides to facilitate the drainage of the remaining oil in the oil pipeline without causing waste!
输油管

Tanker Brand (Refueller brand):
1. Zhengxing tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
2. Hengshan tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
3. Sanjin tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
4. Zhongsheng tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
5. Beilin tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
6. Hengshan tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
7. Shanghai BRIGHT tax tanker, optional small flow (40 L / min) and high flow (70 l / min) in two type flowmeter.
8. The constant stability tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
9. Zhengruntong tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
10. The space tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (80 liters/min).
The above refueling machine brands can be selected according to the actual usage and local maintenance. They are all equipped with a 15-meter refueling pipe, a refueling gun and an automatic return reel.
C. Equipped with two 2kg fire extinguishers, two oil pipelines the same length as the tank body, fire cap, grounding static wire, (safety first, prevention first!)
D. Paint: Aluminum powder silver gray, flammable liquid paste, reflective signs, safety notices.
 
Fuel tank truck optional configuration 18771419532
⑴Sinopec oil depot download system (download oil port, oil and gas recovery, anti-overflow probe probe seat)
⑵Flow meter (Hefei flow meter, Chongqing flow meter)
⑶ Fuel dispenser adjustment chip (only for Hengshan fuel dispenser, Zhengruntong fuel dispenser, and Changwen fuel dispenser)
⑷ Refueling machine machine ticket printing function
⑸Unmanned management system of fuel dispenser IC card
⑹ Cab air conditioner (built-in type, external type)
⑺6mm carbon steel tank material
⑻The color of the whole vehicle is optional
 
Tank truck transportation medium
Gasoline, dangerous goods category item number: 3, density: 0.7 (tons/m3)
Ⅰ. The procedures for holding the entire vehicle go to the local affiliate company contacted to sign an affiliate agreement.
Ⅱ. With the assistance of the local affiliated company, handle the vehicle purchase tax payment.
Ⅲ. Handle commercial insurance for vehicles, compulsory traffic insurance, vehicle and vessel tax, carrier liability insurance, excluding deductibles, seat insurance, etc.
Ⅳ. Go to the local vehicle management office to apply for registration, vehicle inspection, vehicle inspection line, external inspection, weighing, re-inspection, high shot, number selection, number plate application, vehicle license, motor vehicle registration certificate, machine Procedures are required for motor vehicle inspection marks and vehicle environmental protection marks.
Ⅴ. Install GPS real-time monitoring in accordance with the local transportation management department, and apply for the operation license of the vehicle. The operation license will be issued within 12-30 days. The specific notification of the local transportation management shall prevail.
Ⅵ. After completing all the procedures, you can operate and make money.


Car process (Purchasing process):


HD pictures
江淮骏铃7吨加油车图片
江淮骏铃7吨加油车图片
江淮骏铃7吨加油车图片
江淮骏铃7吨加油车图片
illustrate in detail
Total vehicle weight (kg): 9300, rated weight (kg): 4670, curb weight (kg): 4435
Keywords:
Fuel Tank Truck, Jac , , , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
3 + 9 = ?

Maybe you like also

Open chat
1
Whatsapp Talk Now!