Isuzu 3.5 ton foam fire truck is a National VI foam fire truck modified with Isuzu 700P series chassis. Vehicle model: JDF5100GXFPM30/Q6 foam fire truck .
The Isuzu 3.5 ton foam fire truck is composed of two parts: the fireman's cabin and the body. The cabin is double-row and can take 3+3 people. The vehicle has a built-in tank structure. Water tank, the rear is the pump room. The liquid carrier tank is made of high-quality carbon steel and is elastically connected to the chassis. It carries 2600kg of water and 780kg of foam liquid. It is equipped with a CB10/30 low-pressure fire pump with a rated flow of 30L/S, and a PL24 vehicle fire monitor is installed on the roof. The biggest feature of the car is the large liquid carrying capacity, good handling and easy maintenance. It can be widely used in public security fire brigade, factories and mines, communities, docks and other places to fight large oil fires or general material fires.
The fire performance of the Isuzu 3.5-ton foam fire truck meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the sixth stage limit of GB17691-2018 (national VI standard); the whole vehicle has passed the national fire protection Equipment quality supervision and inspection center inspection.
Main parameters of Isuzu 3.5 ton foam fire truck
| Outside dimensions | 6860×2290×3050mm |
| maximum total mass | 9700kg |
| liquid carrier | Water 2600kg, foam 780kg |
| top speed | 95km/h |
| Fire pump rated flow | 30L/s 1.0MPa |
| Fire monitor rated flow | 24L/s 1.0MPa |
| Fire cannon range | Foam≥40m Water≥45m |
| specific power | 139/9.7=14.33 |
| Approach / departure angle | 20°/16° |
Main parameters of Isuzu 3.5 ton foam fire truck
| model | QL1110ANKAY |
| manufacturer | Qingling Motor Co., Ltd. |
| Engine rated power | 139kw |
| engine capacity | 5193ml |
| Engine Emission Standards | GB17691-2018 National VI |
| drive form | 4×2 |
| wheelbase | 3815mm |
| Maximum allowable gross weight | 10550kg |
| Minimum turning radius | ≤7.5m |
| gearbox | manual |
| power takeoff | Sandwich PTO |
jug
|
capacity |
2600kg |
|
material |
High-quality carbon steel with a thickness of 3mm ( stainless steel and PP material can be used according to user needs ) |
| Tank fixing | Elastic connection with chassis frame |
|
Tank Setup |
Manhole: 1 manhole with a diameter of 460mm, with a quick locking/opening device |
| Overflow port: 1 DN65 overflow port | |
| Residual water outlet: set up a DN40 water tank to discharge residual water, with ball valve | |
| Water injection port: connect 1 DN65 port on the left and right sides of the water tank | |
| Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN100 valve, manual control, set 1 water pump to the water tank filling pipe, DN65 valve, manual control |
foam tank
| capacity | 780kg |
|
material |
High-quality carbon steel with a thickness of 3mm ( stainless steel and PP material can be used according to user requirements ) |
|
Tank fixing |
Elastic connection with chassis frame |
|
Tank Setup |
Manhole: 1 DN460 manhole, with quick locking/opening, automatic pressure relief device |
| Overflow port: 1 DN40 overflow port | |
| Residual liquid outlet: set up a DN40 foam tank to discharge residual liquid | |
| Foam outlet: set 1 DN40 foam tank to pump out foam pipe |
water pump
| model | CB10/30-RS type low pressure vehicle fire pump |
| form | low pressure centrifugal |
| Limited Data | 30L/s @1.0MPa |
| outlet pressure rating | 1.0MPa |
| maximum suction depth | 7m |
| water diversion device | Piston Vacuum Pump |
| Diversion time | Maximum suction depth≤50s |
Car foam cannon
| model | PL24 |
| manufacturer | Chengdu West Fire Machinery Co., Ltd. |
| Rotation angle | 360° horizontal rotation |
| Maximum pitch/depression angle | Depression angle≤-15°, elevation angle≥+45° |
| flow | 24L/S |
| range | Foam≥40m Water≥45m |
Fire control system <br>The control panel mainly includes two parts: cab control and pump room control
| In-cab controls | Water pump disengagement, warning light alarm, lighting and signal device control, etc. |
| Pump room control | Bodywork main power switch, parameter display, status display |
Equipment (standard)
| 1 | straw | KD100/2 m | 4 | root | threaded |
|
2 |
water filter | FLF100 | 1 | piece | threaded |
|
3 |
Trap | FII80/65×2-1.6 | 1 | piece | Internal button |
|
4 |
water collector | JII100/65×2-1.0 | 1 | piece | Internal button |
|
5 |
hose | 13-65-20 | 6 | plate | Internal button |
|
6 |
hose | 13-80-20 | 2 | plate | Internal button |
|
7 |
Reducer | KJ65/80 | 2 | piece | Internal button |
|
8 |
Hose wrap | DT-SB | 4 | piece | |
|
9 |
Hose hook | 4 | piece | ||
|
10 |
Ground hydrant wrench | QT-DS1; length 400 | 1 | piece | |
|
11 |
underground fire hydrant wrench | Long 860 | 1 | piece | |
|
12 |
Suction wrench | FS100 | 2 | piece | |
|
13 |
DC switch water gun | QZG3.5/7.5; 65 | 1 | branch | Internal button |
|
14 |
DC Blossom Water Gun | QZK3.5/7.5; 65 | 1 | branch | Internal button |
|
15 |
fire extinguisher | 3 kg/ABC |
1 |
Tool | |
|
16 |
fire waist axe | Length 390; GF-285 |
1 |
piece | |
|
17 |
rubber hammer |
1 |
piece | ||
|
18 |
Rechargeable Portable Lights |
1 |
cup | ||
|
19 |
fire bucket |
1 |
indivual | ||
|
20 |
Air Foam Gun (with gun pipette) | QP4/0.7Z; 65 | 1 | branch | Internal button |
|
twenty one |
foam pipette | Φ40×2700 | 1 | root |
