It adopts an Isuzu 100P double-row chassis, a 3360 (mm) wheelbase, an Isuzu 120 horsepower engine, and a 5-speed gearbox. 7.50-16 nylon tires. 2 tons of front axle, 3.5 tons of rear axle, the size of the vehicle is 7400×2000×3100mm.
The 12-meter high-altitude operating vehicle is equipped with a three-section folding arm hydraulic lifting design, and the working height can reach 16 meters. Each working arm is equipped with a directional balance valve to improve the stability of the boom in the process of raising, lowering and stopping. The double-station operation of the turntable and working bucket is safe and convenient. The working arm can rotate 360° in all directions, effectively expanding the scope of work and improving work efficiency.
The 12-meter high-altitude operating vehicle adopts the original imported German Hawe solenoid valve (main control valve), proportional valve, and proportional handle; electro-hydraulic proportional control, stepless speed regulation, superior operating performance; two operations on the turntable and working bucket, and both can be operated Remote control of engine ignition and flameout; built-in combined leveling mechanism to ensure that the working bucket is always level;
The horizontal and vertical expansion and contraction of the four outriggers can be controlled separately, and the adaptability is strong; the upper arm elevation limit device prevents dangerous working conditions; the interlocking and soft leg protection functions of the car to ensure safe operation; when the horizontal leg is not extended, the working arm is restricted from rotating but Unlimited take-off and landing, which not only guarantees safety but also improves efficiency; equipped with emergency pump; equipped with electronic timer, which can accumulate working time for timely maintenance.