Introduction
Chassis description
Hongyan Jessie C500 flat-top cab, engine: Corso 390 horsepower- Euro V Total mass: 25000 (Kg) Curb weight: 11815 (Kg) Rated mass: 12990 (Kg) Axle load: 6500/6500/18000 axle Distance: 1850+3600+1350 (mm) Number of axles: 4 (four axles) (8×4) Maximum speed: 83 (km/h) Transmission: Fast 12-speed front and rear axle: 9 tons front axle 16 tons double Number of rear axle tires: 10+1 Tire specifications: 12.00R-20 Original steel wire tires Front track: 1986,1940 Rear track: 1860/1860 Chassis emission standard: Euro V
Modification instructions
Tank parameters (18 cbm mixer truck) Tank body material: Alloy steel (special wear-resistant material—increasing tank life by more than 3 times) Cylinder body material: 16 manganese steel 6mm alloy steel Blade material: Baosteel 520 5mm alloy steel ( Add wear-resistant strips to increase service life) Head material: 8mm alloy steel reducer: German ZF reducer/Italy Bonfiglioli PMP (pure import) Hydraulic system: German Rexroth,/Eaton/Sao/PMP(Italy) Pure import) Water supply system: 400L water tank air pressure water supply and heat dissipation system: Kaitong radiator/Xinxiang radiator Feeding speed: Feeding speed m3/min≥3 Discharging speed: Discharging speed m3/min ≥ 2 Discharge residual rate: Discharge residual rate (%) ≤0.5 Operation mode: Three-way operation on the left and right sides and the cab. Discharge range: 180°, up and down, left and right height adjustment safety device: additional leakage receiving device
Detailed description
| Hongyan Jieshi 18 cbm mixer truck parameters |
| Vehicle name: |
Hongyan 18 cbm concrete mixer truck |
| engine: |
Corso 390 horsepower- Euro Five |
| Dimensions: |
10520×2490×3990 |
| Total mass: |
25000(Kg) |
| Quality of preparation: |
11815(Kg) |
| Axle load: |
6500/6500/18000 |
| Number of axes: |
4 (four axis) (8×4) |
| Gearbox: |
Fast 12 gears |
| Number of tires: |
10+1 |
| Front track: |
1986,1940 |
| Chassis emission standards: |
( Euro Fifth Standard-No worries on licensing) |
| Chinese Brand: |
Hongyan Jieshi 18 cbm concrete mixer truck |
| Displacement (ml): |
11596 |
| Stirring volume: |
18 cbm meters (18 cbm meters mixer truck ) |
| Number of springs: |
13/14/12, left 14 right 13/left 14 right 13/12 |
| Rated quality: |
12990(Kg) |
| Wheelbase: |
1850+3600+1350(mm) |
| Maximum speed: |
83(km/h) |
| Front and rear axles: |
9 tons front axle 16 tons double rear axle |
| Tire specifications: |
12.00R-20 Original steel wire tire |
| Rear wheelbase: |
1860/1860 |
| Advantages of Hongyan Jieshi 1 8- cbm mixer truck |
| Model advantages: |
Among the concrete mixer truck models, the industry has the largest market share |
| Engine advantages: |
Corso’s 390-horsepower Euro V EFI engine has authentic Euro IV emission standards. The engine has strong power, faster upgrade, more economical and fuel-efficient, environmentally friendly and pollution-free! |
| Gearbox advantages: |
Fast 12-speed gearbox, large torque, fast climbing, inter Euro quality, high quality, light operation |
| Axle advantages: |
The vehicle is equipped with high-strength double rear axles, with strong bearing capacity, free of disassembly and maintenance, saving labor and money! |
| Advantages of the cab: |
Dongfeng cab has good sound insulation effect, and the overall is stronger and safer! Ho Central console, the original air-conditioning, luxurious mobile mansion! |
| Vehicle advantages: |
Create the best profit model for high-speed, high-efficiency, high-reliability, and fuel-saving |
| After-sales service: |
There are 1,300 after-sales service outlets nationwide, and the service is thoughtful, allowing you to worry-free after-sales! |
| Quality Assurance: |
Imported Corso engine, Fast gearbox and Hande MAN technology drive axle, inter Euro top configuration 1.5 million kilometers without major repair, high temperature, high pressure, high cold, high weight |
| Tank parameters |
| Tank material: |
Alloy steel (special wear-resistant material — increase tank life more than 3 times) |
| Blade material: |
Baosteel 520 5mm alloy steel (add wear strips to increase service life) |
| Reducer: |
German ZF reducer / Italian Bonfiglioli PMP (net import) |
| water supply system: |
400L water tank air pressure water supply |
| Feeding speed: |
Feeding speed m3/min≥3 |
| Residual rate of discharge: |
Residual rate of discharge (%) ≤0.5 |
| Unloading range: |
180° up, down, left and right height adjustment |
| Cylinder material: |
16 manganese steel 6mm alloy steel |
| Head material: |
8mm alloy steel |
| Hydraulic system: |
Rexroth, Germany, Eaton, Sao, PMP, Italy (net import) |
| cooling system: |
Kaitong radiator/Xinxiang radiator |
| Discharge speed: |
Discharge speed m3/min ≥ 2 |
| Operation method: |
Three-way operation of the left and right sides and the cab |
| safety devices: |
Installation of leakage receiving device |
| Advantages of mixing tank |
| Mixer reducer: |
Inter Euro imported brands, German Rexroth, Italian PMP, Italian Bonfiglioli, etc., with strong carrying capacity and low failure rate |
| Hydraulic system of mixer truck: |
All use inter Euro ly renowned hydraulic systems, German Rexroth, American Eaton, American Sao, and Italian PMP liquid systems. The tank runs more stably, the discharge speed is faster, and the residual rate is low! |
| Supporting facilities: |
The vehicle’s feeding and unloading is convenient, the speed is fast, and the multi-function operation mode saves time, effort and worry! |
| After-sales service: |
Three guarantees service for tank reducer for one year or 30,000 kilometers |
| Service Information |
| After-sales service: |
Three guarantees of after-sales service for chassis and bodywork for one year or 30,000 kilometers |
| payment method: |
Prepaid deposit production, pay the balance in installments before picking up the car (simple procedures) |
| installment: |
Down payment ratio 30% |
| Mode of transportation: |
Come to the company to pick up or deliver the car on behalf of the company’s logistics department |
HD pictures
illustrate in detail
Video display
Engine advantage: Corso’s 390 horsepower Euro five EFI engine has authentic Euro IV emission standards, with strong engine power, faster upgrade, more economical and fuel-efficient, environmentally friendly and pollution-free! Gearbox advantages: Fast 12-speed gearbox, large torque, fast climbing, inter Euro quality, high quality, light operation. Mixer gear reducer: inter Euro imported brands, German Rexroth, Italian PMP, Italian Bonfiglioli, etc., carrying capacity Strong, low failure rate Mixer hydraulic system: All inter Euro ly renowned hydraulic systems, German Rexroth, American Eaton, American Sao, Italian PMP liquid system, tank operation is more stable, the unloading speed is faster, and the residual rate is low!
