Foton Aumark Flatbed One Tow Two Wrecker Truck ( Euro 4)

The flatbed of the car is 5.6 meters long and 2.3 meters wide, with a 3P2A folding stamping flatbed. The car is made of the Euro standard 5mm thick carbon steel checkered plate. The flat plate is composed of multiple pressed pre-pressing plates, and 12 reinforced channel steel beams are fixed, which not only reduces the weight of the whole car, but also increases the lifting and loading capacity. The maximum load-bearing mass is 3 tons, the minimum inclination angle of the flat plate is 8 degrees, and the lifting system has a rated lifting mass of 1.8 tons. It uses a 4-ton hydraulic winch, a thickened steel wire rope of 20 meters, a tool box, and a hand washing box. Equipped with 6 straps, two trolleys (auxiliary wheels), a pair of fork holders, a pair of fork holders, a pair of L-shaped tire holders, a chain hook, and an optional LED long row of warning lights. The chassis adopts Omarco BJ1089VEJEA-FB, Kangjiguo 160 horsepower ( Euro Fourth ISF3.8s4154), Aoling 2.05m single-row front-turn cab with air conditioning, 6-speed gearbox, front axle 3 tons and rear axle 6 tons, 8.25 R16 steel wire tires, power steering, air conditioning, clutch assist, exhaust brake, air brake, radio + MP3 + load sensing proportional valve, air brake.