The electric auger drive unloading is suitable for places where the three-phase 380V power supply is fully equipped and convenient in places such as factories. The unloading speed is fast and stable, economical, and low failure rate. Suitable vehicles can also be equipped with on-board generators to provide 380V power to drive the auger to unload. The feed tank of the hydraulic bulk feed transporter is erected on the chassis of the truck. The special facilities consist of a tank assembly, a conveying system (composed of a horizontal auger at the bottom of the tank, a lifting auger and a discharging auger), and a hydraulic system (high-pressure oil pump via pipes). The three output ends of the valve connected to the distribution valve are the angle hydraulic motor, the lifting cylinder, the horizontal auger, the vertical lifting auger, and the discharge auger hydraulic motor connected in series), the electric system, and the pneumatic sub-storage mechanism. composition.
The power take-off is driven by the output power of the automobile gearbox, and then drives the high-pressure oil pump to drive the hydraulic system. The hydraulic motor drives the blade shaft and blades of the horizontal screw conveyor to rotate through the transmission device. Feed output.
The power take-off is driven by the output power of the automobile gearbox, and then drives the high-pressure oil pump to drive the hydraulic system. The hydraulic motor drives the blade shaft and blades of the horizontal screw conveyor to rotate through the transmission device. Feed output.
