Chengli Special Automobile Co., Ltd
Tel: +86 18872992009 | sales@cl-spv.com
EnglishالعربيةFrançaisРусский

Dongfeng Tianlong 20 tons aluminum alloy oil tank truck

Introduction
Chassis description

Dongfeng Tianlong high-roof cab, Cummins 315 horsepower engine, wheelbase 2050+4400+1350mm, 295 vacuum tires, 9-speed gearbox, 5 tons front axle, 10 tons rear axle, front disc brake, speed limiter, ABS, air conditioning

Modification instructions

The tank volume is made strictly according to the announced size. The announced volume is 27.5 cubic meters (the actual volume is about 30 cubic meters). The tank body material is made of aluminum alloy. The tank body thickness is 6MM, the head is 7MM, and the single warehouse comes with a complete set of European standards (two European standard tank port, a subsea valve, a bottom oil port, an exhaust gas recovery connector, an anti-overflow probe, probe seat), equipped with a 19-year new regulation emergency shut-off valve automatic closing system, with an electrostatic reel, and a tool Box, with aluminum alloy folding guardrail, the rest are made according to aluminum can standard, equipped with a fire cap, two oil pipelines equal to the tank body, two fire extinguishers, and the rest are equipped according to the factory standard to ensure that the tank body and the overall dimensions of the vehicle are in accordance with the Announcement production. Paint: do not paint, stick reflective strips, stick reflective tape, three: flammable liquid label, safety notice.

Detailed description

  PRODUCT DEscriptION/ product manual
Dongfeng 8×4 oil tanker tanker, can do carbon steel tank and aluminum tank, as well as stainless steel tanks, can be divided into bins, can be installed tanker, you can increase a lot of other hidden feature that allows customers Greater benefits.






Dongfeng Tianlong high-roof cab, Cummins 315 horsepower engine, wheelbase 2050+4400+1350, 295 vacuum tires, 9-speed gearbox, 5 tons front axle, 10 tons rear axle, front disc brake, speed limiter, ABS, Air-conditioning, the fuel for the car has been released, and it is operated by the Shanghuo Office, and the annual review is worry-free.

 

Chu Sheng Hubei Automotive Co. tanker tank full line of high quality aluminum alloy, bowser is guaranteed during operation of the internal pressure and atmospheric pressure a basic actuator, installed in a tank large breathing valve cover , The bottom of the tank is equipped with a submarine valve, also known as an emergency shut-off valve, which is installed at the bottom of the tank, which can replace the traditional top-loading refueling for bottom-loading refueling, making the operation more convenient, time-saving, safe and environmentally friendly. A cut-off groove is designed on the valve body. In the event of an accident in the tanker, the cut-off groove is disconnected, and the under-vehicle pipeline and the tank body are cut off without affecting the tank body’s sealing, effectively preventing the oil leakage in the tank and ensuring oil The tank is safe. The tank trucks produced by our company are suitable for transporting gasoline, kerosene, diesel, vegetable oil, edible oil, heavy oil, coal tar and non-petroleum products such as alcohol, aldehyde, benzene, ether and other liquid substances.


The volume of the tank body of Dongfeng Tianlong oil tanker: gasoline medium, the announced volume is 27.5 cubic meters, the actual volume is about 30 cubic meters , the tank body is made of high-quality aluminum alloy Euro standard plates, the world’s pressure volume cutting-edge manufacturing equipment, one-time roll forming manufacturing process, machinery Horizontal welding seam, computer-controlled automatic forming head, full welding and butt joints inside and outside, completely seamless forming. The thickness of the tank body is 6mm, which is solid and durable. The whole tank body can be divided into single warehouse or multiple warehouses, and the warehouse can be divided into rooms. There is a through hole at the lower end of the middle partition, and each warehouse is welded with sub-warehouses or multiple warehouses. The warehouse can be divided into compartments. The lower end of the middle partition board has a through hole. Each warehouse is welded with a sub-warehouse strengthening wave partition to reduce the tank when the car is driving. The impact of the oil in the body and the improvement of the rigidity of the tank body, the use of high-pressure gas leak testing, 100% X-ray flaw detection, so that the tank body has the characteristics of high strength, stable center of gravity, safe and stable vehicle transportation. Issue a tank inspection report.

Humanized design(User friendly design):

Connect a one-inch aluminum alloy tube at the front end of the oil pipeline on both sides to facilitate the drainage of the remaining oil in the oil pipeline without causing waste!
输油管

 
 
Fuel tank truck optional configuration 18771419532
⑴Sinopec oil depot download system (download oil port, oil and gas recovery, anti-overflow probe probe seat)
⑵Flow meter (Hefei flow meter, Chongqing flow meter)
⑶ Fuel dispenser adjustment chip (only for Hengshan fuel dispenser, Zhengruntong fuel dispenser, and Changwen fuel dispenser)
⑷ Refueling machine machine ticket printing function
⑸Unmanned management system of fuel dispenser IC card
⑹ Cab air conditioner (built-in type, external type)
⑺6mm carbon steel tank material
⑻The color of the whole vehicle is optional
 
Tank truck transportation medium
Gasoline, dangerous goods category item number: 3, density: 0.7 (tons/m3)
Ⅰ. The procedures for holding the entire vehicle go to the local affiliate company contacted to sign an affiliate agreement.
Ⅱ. With the assistance of the local affiliated company, handle the vehicle purchase tax payment.
Ⅲ. Handle commercial vehicle insurance, compulsory traffic insurance, vehicle and vessel tax, carrier liability insurance, excluding deductibles, seat insurance, etc.
Ⅳ. Go to the local vehicle management office to apply for registration, vehicle inspection, vehicle inspection line, external inspection, weighing, re-inspection, high shot, number selection, number plate application, vehicle license, motor vehicle registration certificate, machine Procedures are required for motor vehicle inspection marks and vehicle environmental protection marks.
Ⅴ. Install GPS real-time monitoring in accordance with the local transportation management department, and apply for the operation license of the vehicle. The operation license will be issued within 12-30 days. The specific notification of the local transportation management shall prevail.
Ⅵ. After completing all the procedures, you can operate and make money.

Car process (Purchasing process):


HD pictures
东风天龙20吨铝合金油罐车图片
东风天龙20吨铝合金油罐车图片
东风天龙20吨铝合金油罐车图片
东风天龙20吨铝合金油罐车图片
illustrate in detail

 

The announced volume is 27.5 cubic meters (the actual volume is about 30 cubic meters). The tank body material is made of aluminum alloy. The tank body thickness is 6MM, the head is 7MM, and the single warehouse is equipped with a complete set of European standards (two European standard tank ports, one subsea valve, One bottom oil port, one exhaust gas recovery joint, one anti-overflow probe, probe seat), equipped with 19-year new regulation emergency shut-off valve automatic closing system, with electrostatic reel, one tool box, with aluminum alloy folding guardrail, and the rest It is made according to the standard of aluminum cans, equipped with a fireproof cap, two oil pipes equal to the length of the tank body, two fire extinguishers, and the rest are equipped according to the factory standard. Ensure that the tank body and the overall dimensions of the vehicle are made according to the announcement.
Keywords:
Dongfeng, Fuel Tank Truck , , , , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
1 + 6 = ?

Maybe you like also

Open chat
1
Whatsapp Talk Now!