Dongfeng Tianjin Guosi Bulk Feed Transporter
Introduction
Chassis description
Original Dongfeng Tianjin chassis, Tianjin flat head with sleeping cab, Cummins 180 horsepower engine, EuroIV emission standard, Dongfeng 6-speed gearbox, 9 tons rear axle, double-layer girder, 9.00 nylon tires, 5000mm wheelbase, with original air conditioning .
Modification instructions
Standard tank made of carbon steel, effective volume of 20 cubic meters, can hold 12 tons, electric screw auger unloading, electric screw auger connected to three-phase 380V for power supply, unloading pipe inclined 60 degrees, vertical unloading height of 8.6 meters, whole truck unloading 20 minutes when used up. The standard configuration is divided into 3 independent compartments; three-phase 380V electric screw auger is used for unloading, and the unloading speed is 1 cubic meter or more than 0.6 tons per minute; it fully meets the filling needs of the feed tower in the breeding base.
Detailed description
| Vehicle model |
CLW5161ZSLD4 |
Chassis model |
DFL1160BX5 |
Emission Standards |
( EuroIV) Diesel |
| engine model |
Cummins ISB180 40 |
Engine power |
132KW180 horsepower |
Total mass (KG) |
16000 |
| Tire specifications |
9.00-20,9.00R20, |
Gearbox |
Dongfeng 6th gear |
Rated mass (KG) |
7800 |
| Wheelbase (mm) |
5000 |
Number of tires |
6 |
Curb weight (KG) |
8005 |
|
Vehicle size (mm)
|
9000*2450*3800 |
Maximum speed |
90 |
Announcement date |
20131018 |
| Tank volume |
20 cubic |
Unloading speed |
500-600 kg/min |
| Vehicle unloading time |
20 minutes |
Maximum elevation angle of unloading |
70 degrees |
| Horizontal conveying distance |
6.5 meters |
Unloading rotation angle |
360 degree rotation |
| Vertical conveying distance |
8.5 meters |
Tank compartment |
Standard configuration is divided into three warehouses, and 3 different feeds can be loaded at the same time
|
HD pictures
illustrate in detail
Original Dongfeng Tianjin chassis, Tianjin flat head with sleeping cab, Cummins 180 horsepower engine, EuroIV emission standard, Dongfeng 6-speed gearbox, 9 tons rear axle, double-layer girder, 9.00 nylon tires, 5000mm wheelbase, with original air conditioning . Standard tank made of carbon steel, effective volume of 20 cubic meters, can hold 12 tons, electric screw auger unloading, electric screw auger connected to three-phase 380V for power supply, discharge pipe inclined 60 degrees, vertical discharge height of 8.6 meters, complete vehicle It takes 20 minutes to finish unloading. The standard configuration is divided into 3 independent compartments; three-phase 380V electric screw auger is used for unloading, and the unloading speed is 1 cubic meter or more than 0.6 tons per minute; it fully meets the filling needs of the feed tower in the breeding base.
