Introduction
Chassis description
Dongfeng Tianjin cab, wheelbase: 4700mm, Cummins 190 horsepower engine, 295 tubeless tires, 4.5 tons front axle, 9 tons rear axle, Dongfeng 6-speed gearbox, with front disc brake, speed limiter, ABS
Modification instructions
The tank volume is made according to the size of the announcement. The announcement volume is 12.5 cubic meters (the actual volume is about 14.2 cubic meters). There are fuel announcements and environmental protection announcements. System (European standard tank mouth. Oil and gas recovery, submarine valve. Lower oil, anti-overflow probe), equipped with 19-year new regulation emergency shut-off valve G dynamic closing system, equipped with Zhengxing large-flow refueling machine, 15 meters automatic return Reel and gun, equipped with a fire cap, two fire extinguishers, after the production of the tank, make carbon damage, paste reflective label, paste the word “explosion”, safety notice, front exhaust pipe, with European standard lifting guardrail, other factories Internal standard. Issuance of registration procedures (chassis certificate, vehicle certificate, vehicle-mounted tools, warranty manual, service manual) in compliance with Euro laws and regulations.
Detailed description
PRODUCT DEscriptION / Product description
Dongfeng Tianjin oil tanker , diesel/gasoline/kerosene medium, the tank body size of the tanker is 12.5 cubic meters (actually 14.3 cubic meters), according to customer requirements, we can choose different announcements, diesel medium according to Euro regulations, the tank body will be small According to Euro regulations, the tank body of gasoline medium will be larger than that of diesel medium. The tanker can be hung up and down. The emission standards meet the requirements of the Euro environmental protection department. It can be made of carbon steel tank body and aluminum alloy tank body, as well as stainless steel tank body, which can be divided into warehouses, can be equipped with a fuel dispenser, and can add many other hidden functions to maximize customer benefits.
Dongfeng Tianjin cab, wheelbase: 4700mm, Cummins 190 horsepower engine, 295 tubeless tires, 4.5 tons front axle, 9 tons rear axle, Dongfeng 6-speed gearbox, with front disc brake, speed limiter, ABS.
Chu Sheng Hubei Automotive Co., Ltd. based in whole tanker tank made of high quality steel, bowser is guaranteed during operation of the internal pressure and atmospheric pressure based actuation present a breathing valve cover large tank installed, The bottom of the tank is equipped with a submarine valve, also known as an emergency shut-off valve, which is installed at the bottom of the tank, which can replace the traditional top-loading refueling for bottom-loading refueling, making the operation easier, time-saving, safe and environmentally friendly for the staff. A cut-off groove is designed on the valve body. In the event of an accident in the tanker, the cut-off groove is disconnected, and the under-vehicle pipeline and the tank body are cut off without affecting the tank body’s sealing, effectively preventing the oil leakage in the tank and ensuring oil The tank is safe. The tank trucks produced by our company are suitable for transporting gasoline, kerosene, diesel, vegetable oil, edible oil, heavy oil, coal tar and non-petroleum products such as alcohol, aldehyde, benzene, ether and other liquid substances.
The 12-ton Dongfeng Tianjin oil tanker has great flexibility and can be refueled according to demand. It is suitable for cars, loaders, excavators, cranes, etc. , Mining equipment, ship refueling, greatly improving the convenience of refueling various vehicles and equipment, unparalleled flexibility, a wide range of services to the public , reducing the inconvenience of all types of vehicles or equipment that can only be refueled at the gas station , Is a veritable mobile gas station.
The effective volume of the tank body of the 12-ton Dongfeng Tianjin oil tanker is 7 cubic meters (the actual volume is 8.3 cubic meters). The tank body is made of high-quality steel Q235 Euro standard carbon steel sheet, using the world’s leading pressure volume manufacturing equipment, and a one-time rolling and forming manufacturing process. Mechanical transverse welding seam, computer-controlled automatic forming head, full welding butt joint inside and outside, completely seamless forming, the thickness of the tank body is 5mm, solid and durable, the whole tank body can be divided into single warehouse or multiple warehouses, and the inside of the warehouse can be divided into compartments. , There is a through hole at the lower end of the middle partition, and each warehouse is welded with sub-bins or multiple warehouses. The warehouse can be divided into chambers. The lower end of the middle partition has a through hole. Each warehouse is welded with a sub-warehouse strengthening wave partition to reduce the driving time. The impact of the oil in the tank and the improvement of the rigidity of the tank, the use of high-pressure gas leak testing, 100% X-ray flaw detection, so that the tank has the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation. Issue a tank inspection report.
Head Technology Display:
User friendly design:
Connect a one-inch aluminum alloy tube at the front end of the oil pipeline on both sides to facilitate the drainage of the remaining oil in the oil pipeline without causing waste!
Refueller brand:
1. Zhengxing tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
2. Hengshan tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
3. Sanjin tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
4. Zhongsheng tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
5. Beilin tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
6. Hengshan tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
7. Shanghai BRIGHT tax tanker, optional small flow (40 L / min) and high flow (70 l / min) in two type flowmeter.
8. The constant stable tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
9. Zhengruntong tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (70 liters/min).
10. The space tax-controlled fuel dispenser can be equipped with two flowmeter types, small flow (40 liters/min) and large flow (80 liters/min).
The above refueling machine brands can be selected according to the actual usage and local maintenance. They are all equipped with a 15-meter refueling pipe, a refueling gun, and an automatic return reel.
C. Equipped with two 2kg fire extinguishers, two oil pipelines the same length as the tank body, fire caps, grounding static wire, (safety first, prevention first!)
D. Paint: Aluminum powder silver gray, flammable liquid paste, reflective signs, safety notices.
Fuel tank truck optional configuration 18771419532
⑴Sinopec oil depot download system (download oil port, oil and gas recovery, anti-overflow probe probe seat)
⑵Flow meter (Hefei flow meter, Chongqing flow meter)
⑶ Fuel dispenser adjustment chip (only for Hengshan fuel dispenser, Zhengruntong fuel dispenser, and Changwen fuel dispenser)
⑷ Refueling machine machine ticket printing function
⑸Unmanned management system of fuel dispenser IC card
⑹ Cab air conditioner (built-in type, external type)
⑺6mm carbon steel tank material
⑻The color of the whole vehicle is optional
Tank truck transportation medium
Gasoline, dangerous goods category item number: 3, density: 0.7 (tons/m3)
Ⅰ. The procedures for holding the entire vehicle go to the local affiliate company contacted to sign an affiliate agreement.
Ⅱ. With the assistance of the local affiliated company, handle the vehicle purchase tax payment.
Ⅲ. Handle commercial vehicle insurance, compulsory traffic insurance, vehicle and vessel tax, carrier liability insurance, excluding deductibles, seat insurance, etc.
Ⅳ. Go to the local vehicle management office to apply for registration, vehicle inspection, vehicle inspection line, external inspection, weighing, re-inspection, high shot, number selection, number plate application, vehicle license, motor vehicle registration certificate, machine Procedures are required for motor vehicle inspection marks and vehicle environmental protection marks.
Ⅴ. Install GPS real-time monitoring in accordance with the local transportation management department, and apply for the operation license of the vehicle. The operation license will be issued within 12-30 days. The specific notification of the local transportation management shall prevail.
HD pictures
illustrate in detail
