Dongfeng Furuika 8 Ton Flatbed Transport Truck
Introduction
Chassis description
Dongfeng Furica small Flatbed Transporter, tiltable cab, Yunnei 130 engine, small eight-speed gearbox, front axle 3T, rear 8T, frame 230mm wide and 10mm frame plate. The tire is a wire tire 8.25R16, which drives the air brake clutch to assist. Total mass: 4495kg, rated load mass: 1600kg, vehicle size: 5995*2310*2700mm
Modification instructions
⑴ Bottom plate: the longitudinal beam is channel steel, the cross beam is a 100*100mm cbm tube, the upper part of the tire is an 8mm bending part; the bottom plate is a 5mm checkered plate, and the gearbox maintenance port is opened. The frame of the bottom plate is 16# Euro standard channel steel; the tail is 6 pieces of 8mm bending pieces side by side. ⑵ Front gantry: 12# channel steel is used for the frame of the gantry, round pipes are used for vertical supports, and outline lights are installed. ⑶ Climbing ladder: the ladder point does not exceed the size of the announcement, the ladder uses a 60*120*5mm cbm tube, with a width of 600mm; the ladder spacing is 600mm, and the height of the plane under the rear plate is more than 540mm.
Detailed description
HD pictures
illustrate in detail
Flatbed trucks, also known as construction machinery trucks, flatbed trucks, and trailers, are mainly used to transport some non-detachable objects like excavators, loaders, and harvesters. Flatbed trucks are common large-scale trucks in life. This type of truck is generally widely used in large-scale production or engineering locations such as factories and construction sites. The strong load-bearing characteristics of flatbed trucks make them play an important role in the process of economic development. .
