Aerial Bucket Truck

» Special Purpose Truck » Aerial Bucket Truck

Dongfeng 24m Aerial Bucket Truck

Specifications

Introduction

Chassis description

It adopts Dongfeng Tianjin standard flat head row semi-cab, wheelbase 4700mm, Cummins 180 horsepower authentic Euro V engine, Dongfeng 6-speed gearbox, 3.6 tons front axle, 9 tons rear axle, 200L fuel tank, 9.00R20 steel wire tires, with original air conditioner .

Modification instructions

The 22-meter high-altitude operating vehicle is equipped with a three-section folding arm hydraulic lifting design, and the operating height can reach 22 meters. Each working arm is equipped with a directional balance valve to improve the stability of the boom in the process of raising, lowering and stopping. The double-station operation of the turntable and working bucket is safe and convenient. The working arm can rotate 360° in all directions, effectively expanding the scope of work and improving work efficiency.

Detailed description

The Aerial Bucket Truck is mainly composed of a chassis, power transmission device, working device, safety device and hydraulic system.

Power transmission device: The power transmission device includes the power transmission part of each working device of the Aerial Bucket Truck . Commonly used are internal combustion engine-mechanical transmission, electric-mechanical transmission, internal combustion engine-electric transmission, internal combustion engine-hydraulic transmission and other transmission methods.

Working device: The working device of the Aerial Bucket Truck includes the outrigger mechanism, the lifting mechanism, the slewing mechanism, the working platform and its leveling mechanism, etc.
The 22-meter high-altitude operating vehicle can be used for overhanging operations, crossing certain obstacles or lifting at one place for multi-point operations; the platform has a large load capacity, which can be used for two or more people to work at the same time and can carry certain equipment; the mobility of the lifting platform Good, convenient to transfer; beautiful appearance, suitable for indoor and outdoor operations and storage. It is suitable for large-scale high-altitude operations such as stations, docks, shopping malls, stadiums, residential properties, factories and mines workshops.

HD pictures

illustrate in detail

The 22-meter high-altitude operating vehicle adopts the original imported German Hawe solenoid valve (main control valve), proportional valve, and proportional handle; electro-hydraulic proportional control, stepless speed regulation, superior operating performance; two operations on the turntable and working bucket, and both can be operated Remote control of engine point and flameout; built-in combined leveling mechanism to ensure that the working bucket is always level; the horizontal and vertical expansion and contraction of the four outriggers can be controlled independently, with strong adaptability; upper arm elevation limit device to prevent dangerous working conditions; interlocking on and off And soft leg protection function to ensure the safety of operation; when the horizontal leg is not extended, the rotation of the working arm is restricted but not limited to up and down, which not only ensures safety and improves efficiency; it is equipped with an emergency pump; it is equipped with an electronic timer, which can accumulate working time for timely maintenance.

CATEGORY AND TAGS:
Aerial Bucket Truck, Dongfeng 24m aerial work truck, Dongfeng 24m Aerial Bucket Truck , Dongfeng Aerial Bucket Truck , Folding boom Aerial Bucket Truck , High-altitude operating truck quotation, High-altitude operating vehicle manufacturers